Any mikrotik just filtering MAC address and IP address..,,so how we can bypass it...?? a good question I think..,,so let we try and do it..

1. We must be known which IP address is available and Mac address thats IP..,by using IP tolls such netcut, wireshark or collasoft mac scanner..,this time I use collasoft Mac Scanner if you dont understand using this tools you have read post before.
2. After we have IP and Mac Address which available, you just make your IP address and Mac address same as that IP and Mac Address which available.by Click your NETWORK CONNECTION on CONTROL PANEL - Right Click on WIRELESS CONNECTION choose PROPERTIES then CONFIGURE choose ADVANCE tab and looking for NETWORK ADDRESS and fill the blank with Mac Address available then OK
3. The last step is make your IP Address same as Mac Addres available, frist open NETWORK CONNECTION then Right click on WIRELESS CONNECTION so choose PROPERTIES than chose INTERNET PROTOCOL (IPV4) then click properties so choose MANUAL CONFIGURE so fill the blank then OK.
4. Try open your browser and enjoy your free connection.

Ip Address is an address on a computer network consisting of 32-bit version for IPv4 and 128 bits for version IPv6. At this moment the most popular is the ipv4 because ipv6 still in the developmental stage.

ipv4 consists of: Broadcast ID, Host ID and Network ID
example: IP address 192.168.0.0 - 192.168.0.255/255.255.2555.0

• Network ID: 192.168.0.0
• Host ID: 192.168.0.1 - 192.168.0.254
• Broadcast ID: 192.168.0.255  

ipv4 class consists of 2 dri classfull and Classless classfull use the network topology is usually to local or LAN while Classless topology used for more than like MAN LAN or WAN.

Mac address is an address on the network card that shows the network card pabikan made., This address is valid on the seventh layer of the OSI layers., On an ethernet network address allows you to match the IP address to determine the legal client to receive the package., ,

mac address checking only applies to switches or hubs and switches do not apply to the router, because the router runs on the third layer of the OSI layer

Mac Scanner adalah software yang di gunakan untuk melihat atau mengetahui Mac address serta IP address yang terhubung di jaringan, sehingga seorang amin dapat mengetahui kemungkinan IP mana yang sedang disconnect  sehingga dapat langsung membetulakan.,serta dapat diketahui IP yang legal atau ilegal.,

Cara penggunaannya :

1. Instal MAC Scanner Colasoft (download) 
2. Setelah terinstal anda langsung dapat mengunakannya, kamudian pilih jaringan yang akan dijadikan target karena akan langsung terdeteksi.
3. Clik tombol Start (F5).

Cukup mudah bukan..? Selamat Mencoba.,,